Documented Track Record & Project Experience
Official track record encompassing 14 certified engineering projects across Electrical (ELV & Power Supply) and Mechanical (Fire Fighting & Commercial Automotive) disciplines under BEM, ST, JBPM, and JPJ standards.
Lead PEPC engineers reviewing 5D BIM models & on-site mechanical/electrical construction compliance.
Projects Categorized by Discipline & Sub-Discipline
Electrical Engineering Discipline
High-voltage infrastructure, extra low voltage (ELV) security fencing, auditorium audiovisual integration, and statutory utility power supply applications.
Sub-Discipline: Extra Low Voltage (ELV), Audio Visual & Perimeter Security (4 Projects)
Audio Visual System & Associated Works Upgrade at Multipurpose Hall, Block E12, Complex E, Putrajaya
Acoustic modeling, state-of-the-art audiovisual system overhaul, architectural lighting synchronization, and government compliance.
Design, Supply, Test & Commission Electrical Fencing System at Pekan Industri (PKNI), Grid Maintenance East, TNB
High-voltage grid substation critical perimeter pulse fencing, multi-zone alarm telemetry, and safety integration for TNB Grid East.
Design, Supply, Test & Commission Electrical Fencing System at Temerloh Industri (TMID), Grid Maintenance East, TNB
Industrial transmission substation security fencing, energized barrier monitoring, and integration with TNB centralized surveillance.
Design, Supply, Test & Commission Electrical Fencing System at PMU Kertih, Grid Maintenance East, TNB
Critical 275kV/132kV Main Distribution Substation (PMU) perimeter electrification, SCADA telemetry alarm linkage, and substation defense.
Sub-Discipline: Power Supply Management, Feeder Pillar & Metering (5 Projects)
Application for New 3-Phase 200A Meter Panel Installation at Lot 19, Ground & 1st Floor, Taman Sungai Besi, KL
3-Phase 200A commercial meter panel submission, load calculation, distribution board endorsement, and TNB liaison.
Application for Electrical Power Supply for Lakeside Feeder Pillar, Taman Seri Empangan, Presint 5, Putrajaya
Outdoor lakeside feeder pillar power reticulation design, weatherized IP distribution, and local council/TNB approvals.
Application for 3-Phase Meter Stepdown from 600A to 300A at Food Parcel Sdn Bhd, Presint 5, Putrajaya
Meter tariff and capacity step-down (600A to 300A), maximum demand calculation, CT recalculation, and TNB statutory sign-off.
Application for 400A Electrical Power Supply for Sannis Frozen Food Industry
Industrial cold storage 400A incoming power supply application, Main Switchboard (MSB) design, and Suruhanjaya Tenaga filing.
Application for 400A Electrical Power Supply Extension for Sannis Frozen Food Industry
Phase 2 industrial power capacity expansion, switchgear load distribution, and statutory utility endorsement.
Mechanical Engineering Discipline
Certified fire fighting & life safety engineering (JBPM Bomba e-Premis) and JPJ-recognized commercial automotive body/chassis engineering.
Sub-Discipline: Fire Fighting, Building Life Safety & e-Premis (2 Projects)
Proposed Construction of 3-Storey Commercial Shop-Office Building at Lot 49961, Mukim Batu, Taman Batu Permai, Jalan Ipoh, KL
Comprehensive mechanical fire fighting system design, hose reel reticulation, fire alarm zoning, and Bomba e-Premis clearance.
Proposed Amendments & Extensions to 2 Units of 1-Storey Semi-Detached Factory & Existing 3-Storey Office at Nouvelle Industrial Park Balakong, Kajang
Industrial factory & 3-storey office fire protection redesign, automatic sprinkler system, Bomba e-Premis clearance & CCC sign-off.
Sub-Discipline: Commercial Automotive Engineering & JPJ VTA Approvals (3 Projects)
Structural Repair & Reinforcement on Semi-Trailer Main Body Chassis (Reg No: T/BC6507)
Heavy semi-trailer main body stress analysis, chassis welding reinforcement certification, and JPJ roadworthiness compliance.
Proposed Wooden Cargo Body with Detachable Railing Mounted on Daihatsu V59Y
Commercial vehicle body fabrication engineering, weight distribution calculations, detachable railing safety submission to JPJ.
Mechanical Consultancy Services for Re-Approval of Corroded Chassis for Commercial Rigid Cargo Truck (Reg No: ACE1909)
Non-destructive chassis testing, structural reinforcement engineering design, and JPJ certified engineer re-endorsement.
Official Engineering Projects Master Datatable
Based on official company profile for the year 2026.
| # & Sector | Project Title & Scope | Client / Contractor | Valuation & Detail |
|---|---|---|---|
|
#01
[ELEC]
ELV & Audio Visual
|
Audio Visual System & Associated Works Upgrade at Multipurpose Hall, Block E12, Complex E, Putrajaya
Acoustic modeling, state-of-the-art audiovisual system overhaul, architectural lighting synchronization, and government compliance.
Authority: JKR WP PUTRAJAYA
|
JKR WP Putrajaya
Contractor: Avocent Engineering Sdn Bhd
|
RM 988,000.00 |
|
#02
[ELEC]
Power & Metering
|
Application for New 3-Phase 200A Meter Panel Installation at Lot 19, Ground & 1st Floor, Taman Sungai Besi, KL
3-Phase 200A commercial meter panel submission, load calculation, distribution board endorsement, and TNB liaison.
Authority: TNB & SURUHANJAYA TENAGA
|
Sannis Frozen Food Industry
Contractor: Avocent Engineering Sdn Bhd
|
RM 10,000.00 |
|
#03
[MECH]
Fire Fighting & Life Safety
|
Proposed Construction of 3-Storey Commercial Shop-Office Building at Lot 49961, Mukim Batu, Taman Batu Permai, Jalan Ipoh, KL
Comprehensive mechanical fire fighting system design, hose reel reticulation, fire alarm zoning, and Bomba e-Premis clearance.
Authority: JBPM BOMBA e-PREMIS
|
Armour Security System (M) Sdn. Bhd.
Contractor: Avocent Consultant (Advisory)
|
RM 520,000.00 |
|
#04
[ELEC]
Power & Metering
|
Application for Electrical Power Supply for Lakeside Feeder Pillar, Taman Seri Empangan, Presint 5, Putrajaya
Outdoor lakeside feeder pillar power reticulation design, weatherized IP distribution, and local council/TNB approvals.
Authority: PERBADANAN PUTRAJAYA / TNB
|
Food Parcel Sdn Bhd
Contractor: SP Technic Sdn Bhd
|
RM 15,000.00 |
|
#05
[MECH]
Commercial Automotive JPJ
|
Structural Repair & Reinforcement on Semi-Trailer Main Body Chassis (Reg No: T/BC6507)
Heavy semi-trailer main body stress analysis, chassis welding reinforcement certification, and JPJ roadworthiness compliance.
Authority: JPJ DIIKTIRAF
|
A&T Swift Service
Contractor: Professional Logistics Sdn Bhd
|
RM 10,000.00 |
|
#06
[MECH]
Commercial Automotive JPJ
|
Proposed Wooden Cargo Body with Detachable Railing Mounted on Daihatsu V59Y
Commercial vehicle body fabrication engineering, weight distribution calculations, detachable railing safety submission to JPJ.
Authority: JPJ VTA HOMOLOGATION
|
A&T Swift Service
Contractor: Professional Logistics Sdn Bhd
|
RM 30,000.00 |
|
#07
[ELEC]
Power & Metering
|
Application for 3-Phase Meter Stepdown from 600A to 300A at Food Parcel Sdn Bhd, Presint 5, Putrajaya
Meter tariff and capacity step-down (600A to 300A), maximum demand calculation, CT recalculation, and TNB statutory sign-off.
Authority: TNB GRID & UTILITY
|
Food Parcel Sdn Bhd
Contractor: SP Technic Sdn Bhd
|
RM 15,000.00 |
|
#08
[ELEC]
Power & Metering
|
Application for 400A Electrical Power Supply for Sannis Frozen Food Industry
Industrial cold storage 400A incoming power supply application, Main Switchboard (MSB) design, and Suruhanjaya Tenaga filing.
Authority: SURUHANJAYA TENAGA / TNB
|
Sannis Frozen Food Industry
Contractor: Avocent Engineering Sdn Bhd
|
RM 10,000.00 |
|
#09
[ELEC]
Power & Metering
|
Application for 400A Electrical Power Supply Extension for Sannis Frozen Food Industry
Phase 2 industrial power capacity expansion, switchgear load distribution, and statutory utility endorsement.
Authority: SURUHANJAYA TENAGA / TNB
|
Sannis Frozen Food Industry
Contractor: Avocent Engineering Sdn Bhd
|
RM 10,000.00 |
|
#10
[ELEC]
ELV & Electrical Fencing
|
Design, Supply, Test & Commission Electrical Fencing System at Pekan Industri (PKNI), Grid Maintenance East, TNB
High-voltage grid substation critical perimeter pulse fencing, multi-zone alarm telemetry, and safety integration for TNB Grid East.
Authority: TNB GRID DIVISION
|
Grid East Maintenance, Tenaga Nasional Berhad (TNB)
Contractor: Avocent Engineering Sdn Bhd
|
RM 300,000.00 |
|
#11
[ELEC]
ELV & Electrical Fencing
|
Design, Supply, Test & Commission Electrical Fencing System at Temerloh Industri (TMID), Grid Maintenance East, TNB
Industrial transmission substation security fencing, energized barrier monitoring, and integration with TNB centralized surveillance.
Authority: TNB GRID DIVISION
|
Grid East Maintenance, Tenaga Nasional Berhad (TNB)
Contractor: Avocent Engineering Sdn Bhd
|
RM 300,000.00 |
|
#12
[ELEC]
ELV & Electrical Fencing
|
Design, Supply, Test & Commission Electrical Fencing System at PMU Kertih, Grid Maintenance East, TNB
Critical 275kV/132kV Main Distribution Substation (PMU) perimeter electrification, SCADA telemetry alarm linkage, and substation defense.
Authority: TNB GRID DIVISION
|
Grid East Maintenance, Tenaga Nasional Berhad (TNB)
Contractor: Avocent Engineering Sdn Bhd
|
RM 300,000.00 |
|
#13
[MECH]
Commercial Automotive JPJ
|
Mechanical Consultancy Services for Re-Approval of Corroded Chassis for Commercial Rigid Cargo Truck (Reg No: ACE1909)
Non-destructive chassis testing, structural reinforcement engineering design, and JPJ certified engineer re-endorsement.
Authority: JPJ DIIKTIRAF
|
A&T Swift Service
Contractor: Professional Logistics Sdn Bhd
|
RM 30,000.00 |
|
#14
[MECH]
Fire Fighting & Life Safety
|
Proposed Amendments & Extensions to 2 Units of 1-Storey Semi-Detached Factory & Existing 3-Storey Office at Nouvelle Industrial Park Balakong, Kajang
Industrial factory & 3-storey office fire protection redesign, automatic sprinkler system, Bomba e-Premis clearance & CCC sign-off.
Authority: JBPM BOMBA e-PREMIS
|
KPI Plastics (M) Sdn Bhd
Contractor: Avocent Consultant (Advisory)
|
RM 150,000.00 |
Have a Complex Project Requiring Certified Engineering Governance?
From high-voltage 33kV substations to high-rise building automation and JPJ homologations, our registered PEPC directors ensure 100% compliance and zero-delay statutory sign-offs.